Replacing Double Glazed Window Handle
Replacing a double glazed window handle is not difficult provided you follow the right steps. First, you must determine the type of handle you are replacing and measure the spindle.
Cockspur handles are still used in older uPVC windows, however they have a different step height in comparison to aluminum counterparts (also known as spade handles). This means they require a spindle that is longer.
Take a look at the Spindle
When replacing a double-glazed window handle it's necessary to measure the spindle length to ensure you're purchasing the correct replacement. The length of the spindle is determined by how far the handle noses out of the base plate or how far it goes into the lock. It may differ between handles. When measuring the spindle length it is essential that the handle from before has not been removed as it may be impossible to get a precise reading in this case.
In general, it is expected that the new handle will come with the spinning component. The dimensions of the spinning will vary among handles and manufacturers therefore it is important to check before buying. To save time and energy, it's recommended to purchase the spindle and handle together.
Espag handles are the most popular type of uPVC window frames. They use a concealed locking mechanism to open and close the windows. They come in a range of colours and styles to suit your home. When you are choosing an Espag handle for your home, be aware of the spindle's dimensions as it will affect the security of your windows.
These handles are available in different sizes and can be rotated to the left or to the right, based on your preference. They are a simple and efficient option for double-glazed windows.
Another popular type of handle is the tilt and turn window handle. These are typically bulky and strong, as they are designed to lock in two points when opening the window. They are available in a variety of designs such as chrome and stainless steel. They can also be made of brass or white uPVC in order to match ironmongery that is already in use.
The cockspur handle is a more traditional window handle. It has an elongated spur that presses against the frame's wedge. They are a simple and efficient choice for your double glazed window and are available in a broad variety of nib and nose heights to accommodate a wide range of profiles.
Remove the Handle
There are a variety of handles for uPVC double-glazed windows. The most common type are Espag handles, which have spindles that run through them and engages with the locking mechanism of the frame of the window. Other handles include tilt-and-turn ones which allow you to tilt the window to let in air or completely open. These handles are usually bulkier and feature more complex mechanisms. However, they provide greater security. Some handle styles can be used with a key lock which can provide additional security for your home.
Before replacing the window handle, it is important to check the condition of the handle. This will allow you to determine whether the need for a new handle is necessary or if the current handle just needs to be adjusted or replaced. If the handle is broken the handle will need to be replaced completely.
If the handle is simply loose, it might require to be tightened or tightened. With a screwdriver, locate the screws within the handle and remove them. Be sure not to use a power tool as this could cause damage to the window frame as well as the handle. Once the screws have been removed, place them in a secure location.
Once the handle is detached from the window frame, you can take off the handle and replace it with a brand new one. Begin by aligning the new handle with the holes in the window frame. Once you're happy with the alignment, put into the new handle.
Test the newly installed window handle once you've finished by opening and shutting the window several times. If you notice any looseness or wobbling, it is crucial to tighten the screw, as this can cause the window handle to become unstable and potentially fall off.
If you're looking for a replacement window handle, we have a variety of choices available in white uPVC, black, chrome, brass and stainless steel. We stock espag, inline, cranked and tilt and turn handles for all kinds of uPVC, timber and aluminium windows. Based on your needs, we also have slimline handles that reduce the overall size of your handles, which is ideal if space is a concern.
Remove the Screws
You'll need to take off the plastic covers that cover the screws on a window handle before you can install new handles. You can remove them using the help of a screwdriver or your fingernail. They are usually found above and beneath the handle when it is in its open position. Make sure you don't lose any screws while removing the caps.
Depending on the requirements of yours, there are various options for the type of handle you decide to replace. For example, if you're seeking something more sleek than the standard handle, then slimline models could be the best choice. These handles are designed to be used on the same spindle as traditional handles, however they are smaller and won't interfere with blinds or shutters. You can also select from brass, stainless steel and chrome to match the ironmongery in your home.
After you've removed the handle, you can begin creating your new. Before deciding on a replacement, you'll be required to determine the kind of handle you currently have and determine the length of its spindle. You will need to ensure that the new handle is suitable size for your uPVC windows and that the screw holes are in alignment with your existing holes.
You'll need to make sure that the handle is in an open position, and that the spindle has been positioned correctly before you install it. Then, line up the holes for fixing in the handle with the existing hole in the window. Then, place the screws or pins. Be careful not to tighten them too much because this could cause the window frame to break.
You'll have to test the handle by locking and unlocking the window. It is recommended to do this several time to ensure that the window lock is working and to determine if there are any problems. If you are satisfied with the performance of the new window handle you can replace the screw caps and replace the cover.
Install the New Handle
A uPVC window handle is typically designed to last for many years however, it could be damaged and need replacement. It is important to determine the reason for damage before making a decision on the next step.
In RepairMyWindowsAndDoors of instances, a loose window handle will need to be tightened before it can be fixed. This will require taking off the handle to locate the screws which hold it in place. Usually, these screws are hidden on the inside of the handle, however they are easily found with a screwdriver or pair of pliers. Once these are removed, you can separate the handle from the spindle.
Once the old handle is removed, you can replace it with a new one. It is a straightforward process however, you must take care to make sure that the screws are securely in place. The handle must be properly positioned and secured to ensure that it will not be removed again.
Based on the kind of window you have, there are several different kinds of handles that you can use. Cockspur handles are available, as well as tilt and turn handles and Espag locks. Each has its own features, so it is important be sure to use the right handle for your window.
It is essential to use the same handle you did when you replaced the Cadenza handle. This includes the blade's design as well as the fixing center. If you use a flat blade handle where an angled blade handle should be used, then the blade could break.
In general replacing a double glazed window handle is an simple process. It is important to note that there are a variety of styles and sizes of uPVC handles. So, it is important to measure the spindle first before buying the replacement handle. If you follow the steps above, you should be able to fit a new handle in no time.